LIFTING CAPACITY: Up to 3,000 lbs.

LIFTING SPEED: Standard travel speed is 17 fpm.

LOADING PATTERNS: “C,” “Z,” and 90 degrees.

CARRIAGE: Standard dimension is 6 ft. x 6 ft. Cantilever design that is equipped with 42” high safety rails on non-operating sides and safety chains on the operating end(s).

CARRIAGE OPTIONS:
- Galvanized diamond-plate side guards.
- Diagonal load bars on operating end(s).
- Swing gate with latch and status switch.
- Extended height side guard.
- Roof panels.
- Additional Gate Options

TOP LIFTING HEIGHT: 14’

LEVELS: Access lower level and (1) stop above ground.

Clear height requirement:
- 7 ft. (84”) Clearance above upper level for VRC travel up to 10 ft.
- 9 ft. (108”) Clearance for travel heights between 10 ft. and 14 ft.

LIFT STRUCTURE:
- Guide columns are 6” wide-flange structural steel.
- Optional freestanding structural framing available.

HYDRAULIC LIFTING SYSTEM:
A robust single cylinder hydraulic system with dual 2 ½” pistons safely lifts and lowers the carriage. Innovative cylinder design prevents twisting during operation and eliminates moving hoses, cables, chains, and bearings. Pressure compensated control valve regulates the flow of hydraulic fluid and ensures a smooth, steady, and safe lowering speed.

COLOR:
Standard color is Wildeck Gray. Optional colors available. Purchased components are painted per vendor standards. Prior to painting, Wildeck fabricated materials are prepared using a 100% phosphate-free paint pre-treatment process incorporating a non-toxic biodegradable alkaline powder that virtually eliminates the introduction of VOCs into the atmosphere.

SAFETY FEATURES:
Mechanical stops ensure positive leveling with the upper deck. Redundant overload protection prevents carriage from lifting if loaded to more than 120% of rated capacity. Decent safety is controlled via velocity fuses. Safety signage must be clearly displayed including: “NO RIDERS.”

SAFETY GUARDING:
The ANSI/ASME B20.1 code requires safety gates and 8 ft. high guarding on all accessible sides of the lift. V-Lift™ gates have electrical and mechanical interlocks and can only be opened during VRC loading or unloading. Interlocks prevent the VRC from moving unless the gates are fully closed and they cannot be opened if the carriage is not at the designated level.

ELECTRICAL:
208/230/460 VAC, 3-phase (Single-phase option available). Control voltage is 24 VAC. Remote mounted NEMA 12 control panel and hydraulic pump motor are pre-wired prior to shipment. Optional “quick-connect” wiring for VRC push-buttons and gate interlocks is available.

CALL STATIONS:
The main control panel is rated NEMA 12. NEMA 4 call/send stations included for each level have self-maintaining push-buttons and a mushroom-head E-Stop.

DRAWINGS & MANUALS:
Application-specific drawings provided for approval after receipt of Purchase Order and prior to manufacture. Owner’s Manual includes installation, operation, and maintenance instructions.

SHIPMENT:
Consult factory for shipment options. V-Lift™ sub-assemblies typically ship on a flat-bed truck for side off-loading at site.

DESIGNED & MANUFACTURED to meet ANSI/ASME B20.1 “Safety Standard for Conveyors.” Lift is for material transfer only. RIDERS ARE NOT PERMITTED.

Architectural Specifications and Dimensional Drawings

The following documents and drawings are provided for reference and download by Facility Designers, Architects, and Engineers.  For specific product selection and application assistance, please consult with your Wildeck Sales Representative or contact a Wildeck VRC Specialist at
1-800-325-6939.

Conceptual dimensional drawings may be used to determine approximate sizes but are NOT to be used for VRC installation or contruction.  Wildeck provides job-specific drawings when an order is placed.

Downloads:
Architectual Specifications: MSword
Dimensional Drawings: PDF  or   DWG
Product Brochure: PDF