VRC Gates - Material Lift, Freight Elevator

VRC GATES

Safety and Efficiency in Loading/Unloading

Wildeck offers an array of VRC options to suit your specific needs: Gates, Carriages, Ramps, Enclosures, Operator Controls, and more. Safety Guarding Products are also available to protect VRC loading and unloading areas.

All Wildeck VRCs and gates meet applicable codes and are equipped with ‘elevator style’ electro-mechanical door locks for superior performance and durability.

All conveyors are required by ANSI/ASME B20.1 code to have enclosures and gates at each stop or landing, but each application should be examined for adherence to national, state and local codes.

Bi-Parting Swing
Single Panel Vertical
Bi-Panel Vertical Acting
Hinged Right or Left Swing

VRC Gates - Bi-Parting Swing

Requires 8' vertical clearance at either level
Meets ANSI/ASME B20.1 Safety Standards
Rigid Steel Construction
Gate panels are constructed of flattened expanded metal in a tube and angle framing
Heavy duty, maintenance free hinges
Gate panels are latched using an electro-mechanical interlocking device
No Solenoids to Fail
Best used where space is a premium (10-ft max. width recommended)
Ships disassembled with anchors and assembly hardware provided

Downloads:
Dimensional Drawing: PDF

VRC Gates - Single Panel Vertical

Requires 14'-4" vertical clearance at either level
Meets ANSI/ASME B20.1 Safety Standards
Rigid Steel Construction
Gate panel is counterweighted and constructed of flattened expanded metal in a
tube and angle framing
Heavy duty roller chain and sprockets
Gate panel is latched using an electro-mechanical interlock
No Lifting cables to break or solenoids to fail
Best used where isle space is minimal with no height restrictions
(12-ft max. width recommended)
Ships disassembled with anchors and assembly hardware provided

Downloads:
Dimensional Drawing: PDF

VRC Gates - Bi-Panel Vertical Acting

Requires 11'-6" vertical clearance at either level
Meets ANSI/ASME B20.1 Safety Standards
Rigid Steel Construction
Gate panels are counterweighted and constructed of flattened expanded metal in a
tube and angle framing
Heavy duty roller chain and sprockets
Gate panels are latched using an electro-mechanical interlock
No Lifting cables to break or solenoids to fail
Best used where isle space is minimal but height is available
(12-ft max. width recommended)
Ships disassembled with anchors and assembly hardware provided

Downloads:
Dimensional Drawing: PDF

VRC Gates - Hinged Right or Left Swing

Requires 8" vertical clearance at either level
Meets ANSI/ASME B20.1 Safety Standards
Rigid Steel Construction
Gate panel is constructed of flattened expanded metal in a tube and angle framing
Heavy duty maintenance free hinges
Gate panel is latched using an electro-mechanical interlocking device
No solenoids to fail
6-ft maximum width recommended
Available in either swing direction (hinged on left or right)
Ships disassembled with anchors and assembly hardware provided

Downloads:
Dimensional Drawing: PDF