ArmorCar™ VRC Carriage

• Load capacity: Up to 2,000 lbs.
• Standard Carriage Platform: 72”W x 96”L x 84”H
• Fully enclosed carriage with galvanized steel diamond plate floor and walls
• Roof: Standard flattened expanded steel mesh
• Recessed light fixture

Carriage Guarding

The ANSI/ASME B-20.1 code requires that the VRC be guarded so as to prevent injury from inadvertent physical contact. In other words, there needs to be protection from material falling or protruding from the VRC carriage.

Your basic VRC carriage has 42” high pipe rails on the non-operating side(s) and snap chain(s) across the operating (loading / unloading) end(s).The floor of the carriage is typically painted steel plate, either smooth or diamond tread.

Options available to increase your carriage guarding include:

• Flattened expanded metal carriage side guards (48”, 60”, 72”, or full carriage height).
• Galvanized tread plate carriage side guards (48”, or full carriage height).
• Painted sheet metal carriage side guards (48”, 60”, 72”, or full carriage height).
• Our exclusive, fully enclosed ArmorCar™ carriage with galvanized tread plate floor and
      walls, roll-up doors, and an expanded metal roof.
• Flattened expanded metal carriage roofs, used on full load height guarded carriages.
      Galvanized tread plate carriage floor.
• Various carriage mounted gates and load stops.
  

Wildeck sales staff is available to assist you with this. Wildeck also has a broad range of VRC carriage options that can provide the level of guarding that your application requires.

Carriage Gates

Your basic VRC carriage utilizes snap chain(s) across the operating (loading / unloading) end(s). Wildeck has a wide array of optional carriage mounted gates that when combined with our various carriage mounted guarding materials, will provide the degree of protection that your application requires.

Carriage mounted gates can range from:

• Diagonal Drop Bars
• Swing Gates
• Heavy Duty Lift Rails
• Vertical Lift Gates
• Roll-up doors