Home » GUARDS » Protective Barriers » Fork Lift Barriers » Wilgard® End-of-Aisle Rack Protectors » Wilgard® MT End-of-Aisle Rack Protectors

Wilgard® MT End-of-Aisle Rack Protector

Wilgard® MT Rack Protectors are designed for medium-duty rack protection and can provide an adequate barrier to forklift impact in everyday use. They are an affordable solution for increasing warehouse and distribution center safety, and preventing damage to expensive rack and inventory. Medium-Duty Wilgard® MT Rack Protectors are available as individual 'Right-' or 'Left-Side' rack protectors, or as a combined 'Double-Headed' rack protector.

Wilgard® MT End-of-Aisle Rack Protectors are “Made-in-the-USA” and have a durable, safety yellow paint finish that can take the punishment that carts, pallet jacks, and medium-duty forklift trucks dish out every day. When properly secured to your concrete floor with the included 1/2” x 5” anchors, Wilgard® MT rack protectors will help guard your investment without affecting aisle traffic flow patterns.

Wilgard-MT-full
Wilgard MT End-of-Aisle Rack Protector

Featured Resources

Specifications

  • 'Right' or 'Left' rack protectors available from stock
  • Economical solution for protecting standard 42” and 48" wide rack
  • Custom length MT rack protectors also available
  • Half-Moon Head is 8" H by 5/16" thick
  • Angle 3-1/2" W x 6" H x 5/16" thick
  • 48" extension angles are in stock, custom lengths available. Average lead time 2 weeks
  • Three 1/2” x 5” anchors (1 Pkg.) included with Wilgard® MT rack protectors and extension angles
ComponentPart NumberOverall LengthWeight (includes hardware)
42" Right Side ProtectorWRPMT42-R41 1/2"54 lbs.
42" Left Side ProtectorWRPMT42-L41 1/2"54 lbs.
48" Right Side ProtectorWRPMT48-R50"61 lbs.
48" Left Side ProtectorWRPMT48-L50"61 lbs.
48" Extension Angle- MTWRPMT48-EXY47 1/2"40 lbs.
1/2” x 5” Anchor Pkg. (3 anchors)WGR-PLHPN/A1 lb.

Double-Headed Specifications

  • Convenient one-piece custom rack protector design
  • Available for rack widths of 42" and 48”
  • Custom length MT rack protectors also available
  • Unitized construction speeds installation and provides medium-duty impact protection
  • Dual Half-Moon Heads are 8" H by 5/16" thick
  • Angle 3-1/2" W x 6" H x 5/16" thick
  • Three 1/2” x 5” anchors (1 Pkg.) included
Wilgard MT Double-Headed Rack Protector
ComponentPart NumberOverall LengthWeight (includes hardware)
42" Double-Headed ProtectorWRPMT42-D47"78 lbs.
48" Double-Headed ProtectorWRPMT48-D52 1/2"83 lbs.
1/2” x 5” Anchor Pkg. (3 anchors)WGR-PLHPN/A1 lb.

We are very pleased with Wildeck’s quality safety products and the outstanding customer service we have received. We would definitely purchase from them again.

- Ronald Vincze
Quality Manager, Precision Gears, Inc.

Related Products

GUARDS Product Literature & Resources